CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 550x550x20x40 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 550x550x20x40 steel profile weighs 419.2 kg/m (281.70 lb/ft), has a depth of 550 mm (21.65 in), flange width 550 mm (21.65 in). Cross-sectional area: 53,400 mm². Moment of inertia Ix = 304,000.5 cm⁴, Iy = 110,948 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 550 mm | 21.65 in |
| Width (b) | 550 mm | 21.65 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 40 mm | 1.57 in |
| Weight | 419.2 kg/m | 281.70 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 53,400 mm² | 82.770 in² |
| Moment of inertia (Ix) | 304,000.5 cm⁴ | 7303.61 in⁴ |
| Moment of inertia (Iy) | 110,948 cm⁴ | 2665.53 in⁴ |
| Elastic section modulus (Sx) | 11,054.56 cm³ | 674.594 in³ |
| Elastic section modulus (Sy) | 4,034.47 cm³ | 246.200 in³ |
| Plastic section modulus (Zx) | 12,324.5 cm³ | 752.090 in³ |
| Plastic section modulus (Zy) | 6,097 cm³ | 372.063 in³ |
| Radius of gyration (rx) | 23.86 cm | 9.394 in |
| Radius of gyration (ry) | 14.41 cm | 5.675 in |
15.0 kN·m
15.0 kN
0.03 mm
L/216178