CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 500x500x20x30 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 500x500x20x30 steel profile weighs 304.6 kg/m (204.68 lb/ft), has a depth of 500 mm (19.69 in), flange width 500 mm (19.69 in). Cross-sectional area: 38,800 mm². Moment of inertia Ix = 180,097.333 cm⁴, Iy = 62,529.333 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 500 mm | 19.69 in |
| Width (b) | 500 mm | 19.69 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 304.6 kg/m | 204.68 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 38,800 mm² | 60.140 in² |
| Moment of inertia (Ix) | 180,097.33 cm⁴ | 4326.84 in⁴ |
| Moment of inertia (Iy) | 62,529.33 cm⁴ | 1502.27 in⁴ |
| Elastic section modulus (Sx) | 7,203.89 cm³ | 439.610 in³ |
| Elastic section modulus (Sy) | 2,501.17 cm³ | 152.632 in³ |
| Plastic section modulus (Zx) | 8,018 cm³ | 489.290 in³ |
| Plastic section modulus (Zy) | 3,794 cm³ | 231.525 in³ |
| Radius of gyration (rx) | 21.54 cm | 8.482 in |
| Radius of gyration (ry) | 12.69 cm | 4.998 in |
15.0 kN·m
15.0 kN
0.05 mm
L/128069