CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 450x450x20x35 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 450x450x20x35 steel profile weighs 306.9 kg/m (206.26 lb/ft), has a depth of 450 mm (17.72 in), flange width 450 mm (17.72 in). Cross-sectional area: 39,100 mm². Moment of inertia Ix = 145,094.083 cm⁴, Iy = 53,181.583 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 450 mm | 17.72 in |
| Width (b) | 450 mm | 17.72 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 35 mm | 1.38 in |
| Weight | 306.9 kg/m | 206.26 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 39,100 mm² | 60.605 in² |
| Moment of inertia (Ix) | 145,094.08 cm⁴ | 3485.89 in⁴ |
| Moment of inertia (Iy) | 53,181.58 cm⁴ | 1277.69 in⁴ |
| Elastic section modulus (Sx) | 6,448.63 cm³ | 393.521 in³ |
| Elastic section modulus (Sy) | 2,363.63 cm³ | 144.238 in³ |
| Plastic section modulus (Zx) | 7,258.25 cm³ | 442.927 in³ |
| Plastic section modulus (Zy) | 3,581.75 cm³ | 218.573 in³ |
| Radius of gyration (rx) | 19.26 cm | 7.584 in |
| Radius of gyration (ry) | 11.66 cm | 4.592 in |
15.0 kN·m
15.0 kN
0.06 mm
L/103178