CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x350x20x30 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x350x20x30 steel profile weighs 210.4 kg/m (141.38 lb/ft), has a depth of 350 mm (13.78 in), flange width 350 mm (13.78 in). Cross-sectional area: 26,800 mm². Moment of inertia Ix = 57,982.333 cm⁴, Iy = 21,456.833 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 210.4 kg/m | 141.38 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 26,800 mm² | 41.540 in² |
| Moment of inertia (Ix) | 57,982.33 cm⁴ | 1393.03 in⁴ |
| Moment of inertia (Iy) | 21,456.83 cm⁴ | 515.50 in⁴ |
| Elastic section modulus (Sx) | 3,313.28 cm³ | 202.189 in³ |
| Elastic section modulus (Sy) | 1,226.1 cm³ | 74.822 in³ |
| Plastic section modulus (Zx) | 3,780.5 cm³ | 230.701 in³ |
| Plastic section modulus (Zy) | 1,866.5 cm³ | 113.901 in³ |
| Radius of gyration (rx) | 14.71 cm | 5.791 in |
| Radius of gyration (ry) | 8.95 cm | 3.523 in |
15.0 kN·m
15.0 kN
0.15 mm
L/41232