CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 350x350x11x20 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 350x350x11x20 steel profile weighs 136.7 kg/m (91.84 lb/ft), has a depth of 350 mm (13.78 in), flange width 350 mm (13.78 in). Cross-sectional area: 17,410 mm². Moment of inertia Ix = 40,892.508 cm⁴, Iy = 14,295.105 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 350 mm | 13.78 in |
| Width (b) | 350 mm | 13.78 in |
| Web thickness (tw) | 11 mm | 0.43 in |
| Flange thickness (tf) | 20 mm | 0.79 in |
| Weight | 136.7 kg/m | 91.84 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 17,410 mm² | 26.985 in² |
| Moment of inertia (Ix) | 40,892.51 cm⁴ | 982.44 in⁴ |
| Moment of inertia (Iy) | 14,295.11 cm⁴ | 343.44 in⁴ |
| Elastic section modulus (Sx) | 2,336.71 cm³ | 142.596 in³ |
| Elastic section modulus (Sy) | 816.86 cm³ | 49.848 in³ |
| Plastic section modulus (Zx) | 2,574.28 cm³ | 157.093 in³ |
| Plastic section modulus (Zy) | 1,234.38 cm³ | 75.327 in³ |
| Radius of gyration (rx) | 15.33 cm | 6.034 in |
| Radius of gyration (ry) | 9.06 cm | 3.567 in |
15.0 kN·m
15.0 kN
0.21 mm
L/29079