CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1800x550x20x40 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1800x550x20x40 steel profile weighs 615.4 kg/m (413.58 lb/ft), has a depth of 1800 mm (70.87 in), flange width 550 mm (21.65 in). Cross-sectional area: 78,400 mm². Moment of inertia Ix = 4,256,021.333 cm⁴, Iy = 111,031.333 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1800 mm | 70.87 in |
| Width (b) | 550 mm | 21.65 in |
| Web thickness (tw) | 20 mm | 0.79 in |
| Flange thickness (tf) | 40 mm | 1.57 in |
| Weight | 615.4 kg/m | 413.58 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 78,400 mm² | 121.520 in² |
| Moment of inertia (Ix) | 4,256,021.33 cm⁴ | 102250.91 in⁴ |
| Moment of inertia (Iy) | 111,031.33 cm⁴ | 2667.53 in⁴ |
| Elastic section modulus (Sx) | 47,289.13 cm³ | 2885.772 in³ |
| Elastic section modulus (Sy) | 4,037.5 cm³ | 246.385 in³ |
| Plastic section modulus (Zx) | 53,512 cm³ | 3265.516 in³ |
| Plastic section modulus (Zy) | 6,222 cm³ | 379.691 in³ |
| Radius of gyration (rx) | 73.68 cm | 29.007 in |
| Radius of gyration (ry) | 11.9 cm | 4.685 in |
15.0 kN·m
15.0 kN
0.00 mm
L/3026504