CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1600x550x16x50 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1600x550x16x50 steel profile weighs 620.1 kg/m (416.74 lb/ft), has a depth of 1600 mm (62.99 in), flange width 550 mm (21.65 in). Cross-sectional area: 79,000 mm². Moment of inertia Ix = 3,754,583.333 cm⁴, Iy = 138,697.033 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1600 mm | 62.99 in |
| Width (b) | 550 mm | 21.65 in |
| Web thickness (tw) | 16 mm | 0.63 in |
| Flange thickness (tf) | 50 mm | 1.97 in |
| Weight | 620.1 kg/m | 416.74 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 79,000 mm² | 122.450 in² |
| Moment of inertia (Ix) | 3,754,583.33 cm⁴ | 90203.86 in⁴ |
| Moment of inertia (Iy) | 138,697.03 cm⁴ | 3332.20 in⁴ |
| Elastic section modulus (Sx) | 46,932.29 cm³ | 2863.996 in³ |
| Elastic section modulus (Sy) | 5,043.53 cm³ | 307.776 in³ |
| Plastic section modulus (Zx) | 51,625 cm³ | 3150.364 in³ |
| Plastic section modulus (Zy) | 7,658.5 cm³ | 467.352 in³ |
| Radius of gyration (rx) | 68.94 cm | 27.141 in |
| Radius of gyration (ry) | 13.25 cm | 5.217 in |
15.0 kN·m
15.0 kN
0.00 mm
L/2669926