CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1200x550x16x40 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1200x550x16x40 steel profile weighs 486.1 kg/m (326.64 lb/ft), has a depth of 1200 mm (47.24 in), flange width 550 mm (21.65 in). Cross-sectional area: 61,920 mm². Moment of inertia Ix = 1,668,070.4 cm⁴, Iy = 110,954.896 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1200 mm | 47.24 in |
| Width (b) | 550 mm | 21.65 in |
| Web thickness (tw) | 16 mm | 0.63 in |
| Flange thickness (tf) | 40 mm | 1.57 in |
| Weight | 486.1 kg/m | 326.64 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 61,920 mm² | 95.976 in² |
| Moment of inertia (Ix) | 1,668,070.4 cm⁴ | 40075.39 in⁴ |
| Moment of inertia (Iy) | 110,954.9 cm⁴ | 2665.69 in⁴ |
| Elastic section modulus (Sx) | 27,801.17 cm³ | 1696.539 in³ |
| Elastic section modulus (Sy) | 4,034.72 cm³ | 246.215 in³ |
| Plastic section modulus (Zx) | 30,537.6 cm³ | 1863.527 in³ |
| Plastic section modulus (Zy) | 6,121.68 cm³ | 373.569 in³ |
| Radius of gyration (rx) | 51.9 cm | 20.434 in |
| Radius of gyration (ry) | 13.39 cm | 5.270 in |
15.0 kN·m
15.0 kN
0.01 mm
L/1186183