CISC, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1200x500x16x30 CISC in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1200x500x16x30 steel profile weighs 378.7 kg/m (254.47 lb/ft), has a depth of 1200 mm (47.24 in), flange width 500 mm (19.69 in). Cross-sectional area: 48,240 mm². Moment of inertia Ix = 1,224,439.2 cm⁴, Iy = 62,538.912 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1200 mm | 47.24 in |
| Width (b) | 500 mm | 19.69 in |
| Web thickness (tw) | 16 mm | 0.63 in |
| Flange thickness (tf) | 30 mm | 1.18 in |
| Weight | 378.7 kg/m | 254.47 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 48,240 mm² | 74.772 in² |
| Moment of inertia (Ix) | 1,224,439.2 cm⁴ | 29417.15 in⁴ |
| Moment of inertia (Iy) | 62,538.91 cm⁴ | 1502.50 in⁴ |
| Elastic section modulus (Sx) | 20,407.32 cm³ | 1245.336 in³ |
| Elastic section modulus (Sy) | 2,501.56 cm³ | 152.655 in³ |
| Plastic section modulus (Zx) | 22,748.4 cm³ | 1388.198 in³ |
| Plastic section modulus (Zy) | 3,822.96 cm³ | 233.292 in³ |
| Radius of gyration (rx) | 50.38 cm | 19.835 in |
| Radius of gyration (ry) | 11.39 cm | 4.483 in |
15.0 kN·m
15.0 kN
0.01 mm
L/870712