AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 762x304.8x7.9x12.7 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 762x304.8x7.9x12.7 steel profile weighs 106.5 kg/m (71.53 lb/ft), has a depth of 762 mm (30.00 in), flange width 304.8 mm (12.00 in). Cross-sectional area: 13,561.06 mm². Moment of inertia Ix = 134,989.245 cm⁴, Iy = 5,996.759 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 762 mm | 30.00 in |
| Width (b) | 304.8 mm | 12.00 in |
| Web thickness (tw) | 7.9 mm | 0.31 in |
| Flange thickness (tf) | 12.7 mm | 0.50 in |
| Weight | 106.5 kg/m | 71.53 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 13,561.06 mm² | 21.020 in² |
| Moment of inertia (Ix) | 134,989.25 cm⁴ | 3243.12 in⁴ |
| Moment of inertia (Iy) | 5,996.76 cm⁴ | 144.07 in⁴ |
| Elastic section modulus (Sx) | 3,543.02 cm³ | 216.210 in³ |
| Elastic section modulus (Sy) | 393.49 cm³ | 24.012 in³ |
| Plastic section modulus (Zx) | 3,972.1 cm³ | 242.394 in³ |
| Plastic section modulus (Zy) | 601.43 cm³ | 36.701 in³ |
| Radius of gyration (rx) | 31.55 cm | 12.421 in |
| Radius of gyration (ry) | 6.65 cm | 2.618 in |
15.0 kN·m
15.0 kN
0.06 mm
L/95992