AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 685.8x304.8x7.9x9.5 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 685.8x304.8x7.9x9.5 steel profile weighs 86.8 kg/m (58.34 lb/ft), has a depth of 685.8 mm (27.00 in), flange width 304.8 mm (12.00 in). Cross-sectional area: 11,058.92 mm². Moment of inertia Ix = 85,741.955 cm⁴, Iy = 4,486.24 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 685.8 mm | 27.00 in |
| Width (b) | 304.8 mm | 12.00 in |
| Web thickness (tw) | 7.9 mm | 0.31 in |
| Flange thickness (tf) | 9.5 mm | 0.37 in |
| Weight | 86.8 kg/m | 58.34 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 11,058.92 mm² | 17.141 in² |
| Moment of inertia (Ix) | 85,741.96 cm⁴ | 2059.95 in⁴ |
| Moment of inertia (Iy) | 4,486.24 cm⁴ | 107.78 in⁴ |
| Elastic section modulus (Sx) | 2,500.49 cm³ | 152.590 in³ |
| Elastic section modulus (Sy) | 294.37 cm³ | 17.964 in³ |
| Plastic section modulus (Zx) | 2,836.42 cm³ | 173.090 in³ |
| Plastic section modulus (Zy) | 451.69 cm³ | 27.564 in³ |
| Radius of gyration (rx) | 27.84 cm | 10.962 in |
| Radius of gyration (ry) | 6.37 cm | 2.508 in |
15.0 kN·m
15.0 kN
0.10 mm
L/60972