AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 533.4x203.2x7.9x12.7 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 533.4x203.2x7.9x12.7 steel profile weighs 72.0 kg/m (48.40 lb/ft), has a depth of 533.4 mm (21.00 in), flange width 203.2 mm (8.00 in). Cross-sectional area: 9,174.48 mm². Moment of inertia Ix = 43,621.709 cm⁴, Iy = 1,778.008 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 533.4 mm | 21.00 in |
| Width (b) | 203.2 mm | 8.00 in |
| Web thickness (tw) | 7.9 mm | 0.31 in |
| Flange thickness (tf) | 12.7 mm | 0.50 in |
| Weight | 72.0 kg/m | 48.40 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 9,174.48 mm² | 14.220 in² |
| Moment of inertia (Ix) | 43,621.71 cm⁴ | 1048.01 in⁴ |
| Moment of inertia (Iy) | 1,778.01 cm⁴ | 42.72 in⁴ |
| Elastic section modulus (Sx) | 1,635.61 cm³ | 99.811 in³ |
| Elastic section modulus (Sy) | 175 cm³ | 10.679 in³ |
| Plastic section modulus (Zx) | 1,853.42 cm³ | 113.103 in³ |
| Plastic section modulus (Zy) | 270.12 cm³ | 16.484 in³ |
| Radius of gyration (rx) | 21.81 cm | 8.585 in |
| Radius of gyration (ry) | 4.4 cm | 1.733 in |
15.0 kN·m
15.0 kN
0.19 mm
L/31020