AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 2032x508x12.7x50.8 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 2032x508x12.7x50.8 steel profile weighs 597.6 kg/m (401.59 lb/ft), has a depth of 2032 mm (80.00 in), flange width 508 mm (20.00 in). Cross-sectional area: 76,128.88 mm². Moment of inertia Ix = 5,827,128.963 cm⁴, Iy = 111,027.998 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 2032 mm | 80.00 in |
| Width (b) | 508 mm | 20.00 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 50.8 mm | 2.00 in |
| Weight | 597.6 kg/m | 401.59 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 76,128.88 mm² | 118.000 in² |
| Moment of inertia (Ix) | 5,827,128.96 cm⁴ | 139996.77 in⁴ |
| Moment of inertia (Iy) | 111,028 cm⁴ | 2667.45 in⁴ |
| Elastic section modulus (Sx) | 57,353.63 cm³ | 3499.948 in³ |
| Elastic section modulus (Sy) | 4,371.18 cm³ | 266.747 in³ |
| Plastic section modulus (Zx) | 62,959.1 cm³ | 3842.016 in³ |
| Plastic section modulus (Zy) | 6,632.66 cm³ | 404.752 in³ |
| Radius of gyration (rx) | 87.49 cm | 34.444 in |
| Radius of gyration (ry) | 12.08 cm | 4.755 in |
15.0 kN·m
15.0 kN
0.00 mm
L/4143736