AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 2032x406.4x11.1x28.6 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 2032x406.4x11.1x28.6 steel profile weighs 354.6 kg/m (238.26 lb/ft), has a depth of 2032 mm (80.00 in), flange width 406.4 mm (16.00 in). Cross-sectional area: 45,166.36 mm². Moment of inertia Ix = 3,045,055.805 cm⁴, Iy = 32,017.047 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 2032 mm | 80.00 in |
| Width (b) | 406.4 mm | 16.00 in |
| Web thickness (tw) | 11.1 mm | 0.44 in |
| Flange thickness (tf) | 28.6 mm | 1.13 in |
| Weight | 354.6 kg/m | 238.26 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 45,166.36 mm² | 70.008 in² |
| Moment of inertia (Ix) | 3,045,055.81 cm⁴ | 73157.47 in⁴ |
| Moment of inertia (Iy) | 32,017.05 cm⁴ | 769.21 in⁴ |
| Elastic section modulus (Sx) | 29,971.02 cm³ | 1828.952 in³ |
| Elastic section modulus (Sy) | 1,575.64 cm³ | 96.152 in³ |
| Plastic section modulus (Zx) | 34,107.64 cm³ | 2081.385 in³ |
| Plastic section modulus (Zy) | 2,422.63 cm³ | 147.839 in³ |
| Radius of gyration (rx) | 82.11 cm | 32.326 in |
| Radius of gyration (ry) | 8.42 cm | 3.315 in |
15.0 kN·m
15.0 kN
0.00 mm
L/2165373