AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1575x508x12.7x22.2 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1575x508x12.7x22.2 steel profile weighs 329.6 kg/m (221.51 lb/ft), has a depth of 1575 mm (62.01 in), flange width 508 mm (20.00 in). Cross-sectional area: 41,993.82 mm². Moment of inertia Ix = 1,739,209.582 cm⁴, Iy = 48,531.837 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1575 mm | 62.01 in |
| Width (b) | 508 mm | 20.00 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 22.2 mm | 0.87 in |
| Weight | 329.6 kg/m | 221.51 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 41,993.82 mm² | 65.090 in² |
| Moment of inertia (Ix) | 1,739,209.58 cm⁴ | 41784.51 in⁴ |
| Moment of inertia (Iy) | 48,531.84 cm⁴ | 1165.98 in⁴ |
| Elastic section modulus (Sx) | 22,085.2 cm³ | 1347.727 in³ |
| Elastic section modulus (Sy) | 1,910.7 cm³ | 116.599 in³ |
| Plastic section modulus (Zx) | 24,950.05 cm³ | 1522.552 in³ |
| Plastic section modulus (Zy) | 2,926.23 cm³ | 178.570 in³ |
| Radius of gyration (rx) | 64.36 cm | 25.337 in |
| Radius of gyration (ry) | 10.75 cm | 4.232 in |
15.0 kN·m
15.0 kN
0.00 mm
L/1236771