AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1575x406.4x11.1x22.2 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1575x406.4x11.1x22.2 steel profile weighs 275.0 kg/m (184.80 lb/ft), has a depth of 1575 mm (62.01 in), flange width 406.4 mm (16.00 in). Cross-sectional area: 35,033.82 mm². Moment of inertia Ix = 1,419,456.372 cm⁴, Iy = 24,852.367 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1575 mm | 62.01 in |
| Width (b) | 406.4 mm | 16.00 in |
| Web thickness (tw) | 11.1 mm | 0.44 in |
| Flange thickness (tf) | 22.2 mm | 0.87 in |
| Weight | 275.0 kg/m | 184.80 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 35,033.82 mm² | 54.302 in² |
| Moment of inertia (Ix) | 1,419,456.37 cm⁴ | 34102.44 in⁴ |
| Moment of inertia (Iy) | 24,852.37 cm⁴ | 597.08 in⁴ |
| Elastic section modulus (Sx) | 18,024.84 cm³ | 1099.948 in³ |
| Elastic section modulus (Sy) | 1,223.05 cm³ | 74.635 in³ |
| Plastic section modulus (Zx) | 20,510.58 cm³ | 1251.638 in³ |
| Plastic section modulus (Zy) | 1,880.43 cm³ | 114.752 in³ |
| Radius of gyration (rx) | 63.65 cm | 25.060 in |
| Radius of gyration (ry) | 8.42 cm | 3.316 in |
15.0 kN·m
15.0 kN
0.01 mm
L/1009391