AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1473x406.4x11.1x15.9 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1473x406.4x11.1x15.9 steel profile weighs 227.1 kg/m (152.58 lb/ft), has a depth of 1473 mm (57.99 in), flange width 406.4 mm (16.00 in). Cross-sectional area: 28,920.84 mm². Moment of inertia Ix = 962,883.02 cm⁴, Iy = 17,803.6 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1473 mm | 57.99 in |
| Width (b) | 406.4 mm | 16.00 in |
| Web thickness (tw) | 11.1 mm | 0.44 in |
| Flange thickness (tf) | 15.9 mm | 0.63 in |
| Weight | 227.1 kg/m | 152.58 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 28,920.84 mm² | 44.827 in² |
| Moment of inertia (Ix) | 962,883.02 cm⁴ | 23133.26 in⁴ |
| Moment of inertia (Iy) | 17,803.6 cm⁴ | 427.73 in⁴ |
| Elastic section modulus (Sx) | 13,073.77 cm³ | 797.814 in³ |
| Elastic section modulus (Sy) | 876.16 cm³ | 53.467 in³ |
| Plastic section modulus (Zx) | 15,179.26 cm³ | 926.299 in³ |
| Plastic section modulus (Zy) | 1,357.42 cm³ | 82.835 in³ |
| Radius of gyration (rx) | 57.7 cm | 22.717 in |
| Radius of gyration (ry) | 7.85 cm | 3.089 in |
15.0 kN·m
15.0 kN
0.01 mm
L/684717