AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1270x508x12.7x28.6 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1270x508x12.7x28.6 steel profile weighs 349.0 kg/m (234.53 lb/ft), has a depth of 1270 mm (50.00 in), flange width 508 mm (20.00 in). Cross-sectional area: 44,460.16 mm². Moment of inertia Ix = 1,308,490.639 cm⁴, Iy = 62,510.04 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1270 mm | 50.00 in |
| Width (b) | 508 mm | 20.00 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 28.6 mm | 1.13 in |
| Weight | 349.0 kg/m | 234.53 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 44,460.16 mm² | 68.913 in² |
| Moment of inertia (Ix) | 1,308,490.64 cm⁴ | 31436.49 in⁴ |
| Moment of inertia (Iy) | 62,510.04 cm⁴ | 1501.80 in⁴ |
| Elastic section modulus (Sx) | 20,606.15 cm³ | 1257.470 in³ |
| Elastic section modulus (Sy) | 2,461.03 cm³ | 150.182 in³ |
| Plastic section modulus (Zx) | 22,706.11 cm³ | 1385.618 in³ |
| Plastic section modulus (Zy) | 3,739.22 cm³ | 228.182 in³ |
| Radius of gyration (rx) | 54.25 cm | 21.358 in |
| Radius of gyration (ry) | 11.86 cm | 4.668 in |
15.0 kN·m
15.0 kN
0.01 mm
L/930482