AHMSA, welded sections · Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
Put the I 1067x508x12.7x22.2 AHMSA in a real structure
Opens in the 3D editor already set up as a beam, with supports and load. Change the span and the load, then check it against the code.
The I 1067x508x12.7x22.2 steel profile weighs 279.0 kg/m (187.48 lb/ft), has a depth of 1067 mm (42.01 in), flange width 508 mm (20.00 in). Cross-sectional area: 35,542.22 mm². Moment of inertia Ix = 728,800.233 cm⁴, Iy = 48,523.165 cm⁴.
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 1067 mm | 42.01 in |
| Width (b) | 508 mm | 20.00 in |
| Web thickness (tw) | 12.7 mm | 0.50 in |
| Flange thickness (tf) | 22.2 mm | 0.87 in |
| Weight | 279.0 kg/m | 187.48 lb/ft |
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 35,542.22 mm² | 55.090 in² |
| Moment of inertia (Ix) | 728,800.23 cm⁴ | 17509.43 in⁴ |
| Moment of inertia (Iy) | 48,523.17 cm⁴ | 1165.77 in⁴ |
| Elastic section modulus (Sx) | 13,660.74 cm³ | 833.633 in³ |
| Elastic section modulus (Sy) | 1,910.36 cm³ | 116.578 in³ |
| Plastic section modulus (Zx) | 15,102.97 cm³ | 921.644 in³ |
| Plastic section modulus (Zy) | 2,905.74 cm³ | 177.320 in³ |
| Radius of gyration (rx) | 45.28 cm | 17.828 in |
| Radius of gyration (ry) | 11.68 cm | 4.600 in |
15.0 kN·m
15.0 kN
0.01 mm
L/518258