Steel Section Catalog
W200x100
AISC — Wide Flange (I-beam)
Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.
The W200x100 steel profile weighs 100.0 kg/m (67.20 lb/ft), has a depth of 229 mm (9.02 in), flange width 210 mm (8.27 in). Cross-sectional area: 12,587.2 mm². Moment of inertia Ix = 11,258.8 cm⁴, Iy = 3,662.71 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 229 mm | 9.02 in |
| Width (b) | 210 mm | 8.27 in |
| Web thickness (tw) | 14.5 mm | 0.57 in |
| Flange thickness (tf) | 23.7 mm | 0.93 in |
| Fillet radius (r) | 10.2 mm | 0.40 in |
| Weight | 100.0 kg/m | 67.20 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 12,587.2 mm² | 19.510 in² |
| Moment of inertia (Ix) | 11,258.8 cm⁴ | 270.49 in⁴ |
| Moment of inertia (Iy) | 3,662.71 cm⁴ | 88.00 in⁴ |
| Elastic section modulus (Sx) | 983.3 cm³ | 60.005 in³ |
| Elastic section modulus (Sy) | 348.83 cm³ | 21.287 in³ |
| Plastic section modulus (Zx) | 1,141.33 cm³ | 69.649 in³ |
| Plastic section modulus (Zy) | 532.13 cm³ | 32.473 in³ |
| Radius of gyration (rx) | 9.46 cm | 3.724 in |
| Radius of gyration (ry) | 5.39 cm | 2.122 in |
Beam Calculator— W200x100
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — W200x100
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
0.75 mm
L/8006
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
