Steel Section Catalog

UB 610x229x113

EN — Wide Flange (I-beam)

Wide flange beams (W shapes / I-beams) are the most common structural steel profile used in building construction. They are used for beams, columns, and girders in steel-framed buildings and bridges. Designed per AISC 360, Eurocode 3, and NBR 8800.

The UB 610x229x113 steel profile weighs 113.0 kg/m (75.94 lb/ft), has a depth of 607.6 mm (23.92 in), flange width 228.2 mm (8.98 in). Cross-sectional area: 14,256 mm². Moment of inertia Ix = 86,204.35 cm⁴, Iy = 3,432.96 cm⁴.

h=607.6b=228.2tw=11.1tf=17.3
Cross-section (not to scale)

Dimensions

PropertyMetricImperial
Depth (h)607.6 mm23.92 in
Width (b)228.2 mm8.98 in
Web thickness (tw)11.1 mm0.44 in
Flange thickness (tf)17.3 mm0.68 in
Fillet radius (r)12.7 mm0.50 in
Weight113.0 kg/m75.94 lb/ft

Section Properties

PropertyMetricImperial
Area (A)14,256 mm²22.097 in²
Moment of inertia (Ix)86,204.35 cm⁴2071.06 in⁴
Moment of inertia (Iy)3,432.96 cm⁴82.48 in⁴
Elastic section modulus (Sx)2,837.54 cm³173.158 in³
Elastic section modulus (Sy)300.87 cm³18.360 in³
Plastic section modulus (Zx)3,241.53 cm³197.811 in³
Plastic section modulus (Zy)468.1 cm³28.565 in³
Radius of gyration (rx)24.59 cm9.681 in
Radius of gyration (ry)4.91 cm1.933 in
UB 610x229x101UB 610x229x125

Beam Calculator— UB 610x229x113

3D preview unavailable

Your device does not support WebGL. The 2D diagram below is still fully functional.

mfixed @ 0mfixed @ 6m→kN/m

Results — UB 610x229x113

Mmax

15.0 kN·m

Vmax

15.0 kN

δmax

0.10 mm

L/61301

R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard: