Steel Section Catalog
L 75x75x5
AISC — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 75x75x5 steel profile weighs 5.5 kg/m (3.68 lb/ft), has a depth of 76.2 mm (3.00 in), flange width 76.2 mm (3.00 in). Cross-sectional area: 708.5 mm². Moment of inertia Ix = 40.31 cm⁴, Iy = 40.31 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 76.2 mm | 3.00 in |
| Width (b) | 76.2 mm | 3.00 in |
| Thickness (t) | 4.8 mm | 0.19 in |
| Fillet radius (r) | 9.5 mm | 0.37 in |
| Weight | 5.5 kg/m | 3.68 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 708.5 mm² | 1.098 in² |
| Moment of inertia (Ix) | 40.31 cm⁴ | 0.97 in⁴ |
| Moment of inertia (Iy) | 40.31 cm⁴ | 0.97 in⁴ |
| Elastic section modulus (Sx) | 7.28 cm³ | 0.444 in³ |
| Elastic section modulus (Sy) | 7.28 cm³ | 0.444 in³ |
| Plastic section modulus (Zx) | 10.92 cm³ | 0.666 in³ |
| Plastic section modulus (Zy) | 10.92 cm³ | 0.666 in³ |
| Radius of gyration (rx) | 2.39 cm | 0.941 in |
| Radius of gyration (ry) | 2.39 cm | 0.941 in |
Beam Calculator— L 75x75x5
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 75x75x5
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
209.32 mm
L/29
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
