Steel Section Catalog
L 200x100x12
EN — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 200x100x12 steel profile weighs 27.0 kg/m (18.14 lb/ft), has a depth of 200 mm (7.87 in), flange width 100 mm (3.94 in). Cross-sectional area: 3,456 mm². Moment of inertia Ix = 1,449.24 cm⁴, Iy = 254.36 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 100 mm | 3.94 in |
| Thickness (t) | 12 mm | 0.47 in |
| Fillet radius (r) | 18 mm | 0.71 in |
| Weight | 27.0 kg/m | 18.14 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 3,456 mm² | 5.357 in² |
| Moment of inertia (Ix) | 1,449.24 cm⁴ | 34.82 in⁴ |
| Moment of inertia (Iy) | 254.36 cm⁴ | 6.11 in⁴ |
| Elastic section modulus (Sx) | 112.59 cm³ | 6.871 in³ |
| Elastic section modulus (Sy) | 32.31 cm³ | 1.972 in³ |
| Plastic section modulus (Zx) | 168.88 cm³ | 10.306 in³ |
| Plastic section modulus (Zy) | 48.47 cm³ | 2.958 in³ |
| Radius of gyration (rx) | 6.48 cm | 2.551 in |
| Radius of gyration (ry) | 2.71 cm | 1.067 in |
Beam Calculator— L 200x100x12
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 200x100x12
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
5.82 mm
L/1031
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
