Steel Section Catalog
L 200x100x10
EN — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 200x100x10 steel profile weighs 22.7 kg/m (15.25 lb/ft), has a depth of 200 mm (7.87 in), flange width 100 mm (3.94 in). Cross-sectional area: 2,900 mm². Moment of inertia Ix = 1,227.59 cm⁴, Iy = 217.59 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 200 mm | 7.87 in |
| Width (b) | 100 mm | 3.94 in |
| Thickness (t) | 10 mm | 0.39 in |
| Fillet radius (r) | 18 mm | 0.71 in |
| Weight | 22.7 kg/m | 15.25 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,900 mm² | 4.495 in² |
| Moment of inertia (Ix) | 1,227.59 cm⁴ | 29.49 in⁴ |
| Moment of inertia (Iy) | 217.59 cm⁴ | 5.23 in⁴ |
| Elastic section modulus (Sx) | 94.81 cm³ | 5.786 in³ |
| Elastic section modulus (Sy) | 27.38 cm³ | 1.671 in³ |
| Plastic section modulus (Zx) | 142.21 cm³ | 8.678 in³ |
| Plastic section modulus (Zy) | 41.06 cm³ | 2.506 in³ |
| Radius of gyration (rx) | 6.51 cm | 2.563 in |
| Radius of gyration (ry) | 2.74 cm | 1.079 in |
Beam Calculator— L 200x100x10
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 200x100x10
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
6.87 mm
L/873
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
