Steel Section Catalog
L 150x100x10
AISC — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 150x100x10 steel profile weighs 17.9 kg/m (12.03 lb/ft), has a depth of 152.4 mm (6.00 in), flange width 101.6 mm (4.00 in). Cross-sectional area: 2,322.8 mm². Moment of inertia Ix = 559.29 cm⁴, Iy = 203.68 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 152.4 mm | 6.00 in |
| Width (b) | 101.6 mm | 4.00 in |
| Thickness (t) | 9.5 mm | 0.37 in |
| Fillet radius (r) | 12.7 mm | 0.50 in |
| Weight | 17.9 kg/m | 12.03 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,322.8 mm² | 3.600 in² |
| Moment of inertia (Ix) | 559.29 cm⁴ | 13.44 in⁴ |
| Moment of inertia (Iy) | 203.68 cm⁴ | 4.89 in⁴ |
| Elastic section modulus (Sx) | 54.24 cm³ | 3.310 in³ |
| Elastic section modulus (Sy) | 26.21 cm³ | 1.599 in³ |
| Plastic section modulus (Zx) | 81.36 cm³ | 4.965 in³ |
| Plastic section modulus (Zy) | 39.31 cm³ | 2.399 in³ |
| Radius of gyration (rx) | 4.91 cm | 1.933 in |
| Radius of gyration (ry) | 2.96 cm | 1.165 in |
Beam Calculator— L 150x100x10
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 150x100x10
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
15.09 mm
L/398
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
