Steel Section Catalog
L 100x75x13
AISC — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 100x75x13 steel profile weighs 15.9 kg/m (10.68 lb/ft), has a depth of 101.6 mm (4.00 in), flange width 76.2 mm (3.00 in). Cross-sectional area: 2,096.8 mm². Moment of inertia Ix = 210.13 cm⁴, Iy = 100.87 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 101.6 mm | 4.00 in |
| Width (b) | 76.2 mm | 3.00 in |
| Thickness (t) | 12.7 mm | 0.50 in |
| Fillet radius (r) | 9.5 mm | 0.37 in |
| Weight | 15.9 kg/m | 10.68 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 2,096.8 mm² | 3.250 in² |
| Moment of inertia (Ix) | 210.13 cm⁴ | 5.05 in⁴ |
| Moment of inertia (Iy) | 100.87 cm⁴ | 2.42 in⁴ |
| Elastic section modulus (Sx) | 30.95 cm³ | 1.889 in³ |
| Elastic section modulus (Sy) | 18.28 cm³ | 1.116 in³ |
| Plastic section modulus (Zx) | 46.42 cm³ | 2.833 in³ |
| Plastic section modulus (Zy) | 27.41 cm³ | 1.673 in³ |
| Radius of gyration (rx) | 3.17 cm | 1.248 in |
| Radius of gyration (ry) | 2.19 cm | 0.862 in |
Beam Calculator— L 100x75x13
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 100x75x13
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
40.15 mm
L/149
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
