Steel Section Catalog
L 100x100x10
AISC — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The L 100x100x10 steel profile weighs 14.1 kg/m (9.48 lb/ft), has a depth of 101.6 mm (4.00 in), flange width 101.6 mm (4.00 in). Cross-sectional area: 1,840.2 mm². Moment of inertia Ix = 181.01 cm⁴, Iy = 181.01 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 101.6 mm | 4.00 in |
| Width (b) | 101.6 mm | 4.00 in |
| Thickness (t) | 9.5 mm | 0.37 in |
| Fillet radius (r) | 12.7 mm | 0.50 in |
| Weight | 14.1 kg/m | 9.48 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 1,840.2 mm² | 2.852 in² |
| Moment of inertia (Ix) | 181.01 cm⁴ | 4.35 in⁴ |
| Moment of inertia (Iy) | 181.01 cm⁴ | 4.35 in⁴ |
| Elastic section modulus (Sx) | 24.9 cm³ | 1.519 in³ |
| Elastic section modulus (Sy) | 24.9 cm³ | 1.519 in³ |
| Plastic section modulus (Zx) | 37.35 cm³ | 2.279 in³ |
| Plastic section modulus (Zy) | 37.35 cm³ | 2.279 in³ |
| Radius of gyration (rx) | 3.14 cm | 1.236 in |
| Radius of gyration (ry) | 3.14 cm | 1.236 in |
Beam Calculator— L 100x100x10
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — L 100x100x10
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
46.61 mm
L/129
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
