Steel Section Catalog
ISA 70x70x5
IS — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
The ISA 70x70x5 steel profile weighs 5.3 kg/m (3.56 lb/ft), has a depth of 70 mm (2.76 in), flange width 70 mm (2.76 in). Cross-sectional area: 675 mm². Moment of inertia Ix = 32.16 cm⁴, Iy = 32.16 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 70 mm | 2.76 in |
| Width (b) | 70 mm | 2.76 in |
| Thickness (t) | 5 mm | 0.20 in |
| Fillet radius (r) | 9 mm | 0.35 in |
| Weight | 5.3 kg/m | 3.56 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 675 mm² | 1.046 in² |
| Moment of inertia (Ix) | 32.16 cm⁴ | 0.77 in⁴ |
| Moment of inertia (Iy) | 32.16 cm⁴ | 0.77 in⁴ |
| Elastic section modulus (Sx) | 6.35 cm³ | 0.388 in³ |
| Elastic section modulus (Sy) | 6.35 cm³ | 0.388 in³ |
| Plastic section modulus (Zx) | 9.52 cm³ | 0.581 in³ |
| Plastic section modulus (Zy) | 9.52 cm³ | 0.581 in³ |
| Radius of gyration (rx) | 2.18 cm | 0.858 in |
| Radius of gyration (ry) | 2.18 cm | 0.858 in |
Beam Calculator— ISA 70x70x5
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — ISA 70x70x5
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
262.36 mm
L/23
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
