Steel Section Catalog
ISA 50x30x5
IS — Angle Section
Angle sections (L shapes) are used for bracing, connections, lintels, and built-up members. Available in equal and unequal leg configurations.
Also known as: ISA 50x30x5 (UK)
The ISA 50x30x5 steel profile weighs 3.0 kg/m (2.03 lb/ft), has a depth of 50 mm (1.97 in), flange width 30 mm (1.18 in). Cross-sectional area: 375 mm². Moment of inertia Ix = 9.45 cm⁴, Iy = 2.58 cm⁴.
Cross-section (not to scale)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 50 mm | 1.97 in |
| Width (b) | 30 mm | 1.18 in |
| Thickness (t) | 5 mm | 0.20 in |
| Fillet radius (r) | 7 mm | 0.28 in |
| Weight | 3.0 kg/m | 2.03 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 375 mm² | 0.581 in² |
| Moment of inertia (Ix) | 9.45 cm⁴ | 0.23 in⁴ |
| Moment of inertia (Iy) | 2.58 cm⁴ | 0.06 in⁴ |
| Elastic section modulus (Sx) | 2.91 cm³ | 0.178 in³ |
| Elastic section modulus (Sy) | 1.15 cm³ | 0.070 in³ |
| Plastic section modulus (Zx) | 4.36 cm³ | 0.266 in³ |
| Plastic section modulus (Zy) | 1.72 cm³ | 0.105 in³ |
| Radius of gyration (rx) | 1.59 cm | 0.626 in |
| Radius of gyration (ry) | 0.83 cm | 0.327 in |
Beam Calculator— ISA 50x30x5
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — ISA 50x30x5
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
892.86 mm
L/7
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
