Is CalcSteel really free to use?

Yes. CalcSteel is genuinely free — the Free plan includes the full 3D editor, FEM solver, 1,140+ steel profiles, and code verification per NBR 8800, AISC 360, Eurocode 3, AS 4100 and IS 800. Paid plans ($12–29/month) add project saving, unlimited sheets and clean PDF export. No credit card required to start.

What is the best free alternative to SAP2000 and CYPE 3D?

CalcSteel is a browser-based alternative focused on steel structures. For steel frame analysis, portal frames, warehouses and code verification you get a workflow comparable to SAP2000 and CYPE 3D — at zero cost. SAP2000 is still needed for complex dynamics, nonlinear analysis and multi-material projects. CYPE remains stronger in concrete, timber and connection design.

Which design standards does CalcSteel support?

CalcSteel currently verifies steel members per five major international standards: NBR 8800 (Brazil), AISC 360 (USA), Eurocode 3 / EN 1993 (Europe), AS 4100 (Australia) and IS 800 (India). This covers roughly 120+ countries. NBR 14762 for cold-formed sections is also supported.

Do I need to install anything to use CalcSteel?

No. CalcSteel runs entirely in the browser — Chrome, Firefox, Safari or Edge — using WebAssembly for the FEM solver. There is nothing to install, no license server, no dongle. It works on Windows, macOS, Linux and Chromebook.

Can I export my project as a PDF or IFC/BIM file?

Yes. CalcSteel generates professional PDF reports with load combinations, internal forces, utilization ratios and design verification tables. IFC / BIM export is available for interoperability with Revit, Tekla and other BIM tools.

Catálogo de Perfis Metálicos

U 50x25x2

BR — Perfil U (Canal)

Perfis U (canais) são similares aos perfis C, porém sem enrijecedores de borda. Utilizados em estruturas leves, suportes e elementos secundários.

Também conhecido como: U 50x25x2 (UK / Australia)

O perfil de aço U 50x25x2 pesa 1.4 kg/m (0.97 lb/ft), possui altura de 50 mm (1.97 in), largura de mesa 25 mm (0.98 in). Área da seção transversal: 188 mm². Momento de inércia Ix = 7.15 cm⁴, Iy = 1.03 cm⁴.

Seção transversal (fora de escala)

Equivalência popular: espessura 2 mm = Chapa 14 (nomenclatura comercial brasileira)

Dimensões

Propriedade	Métrico	Imperial
Altura (h)	50 mm	1.97 in
Largura (b)	25 mm	0.98 in
Espessura (t)	2 mm	0.08 in
Peso	1.4 kg/m	0.97 lb/ft

Propriedades da Seção

Propriedade	Métrico	Imperial
Área (A)	188 mm²	0.291 in²
Momento de inércia (Ix)	7.15 cm⁴	0.17 in⁴
Momento de inércia (Iy)	1.03 cm⁴	0.02 in⁴
Módulo de resistência elástico (Sx)	2.86 cm³	0.175 in³
Módulo de resistência elástico (Sy)	0.53 cm³	0.032 in³
Módulo de resistência plástico (Zx)	3.29 cm³	0.201 in³
Módulo de resistência plástico (Zy)	0.64 cm³	0.039 in³
Raio de giração (rx)	1.95 cm	0.768 in
Raio de giração (ry)	0.74 cm	0.291 in

U 50x25x1.5 U 50x25x2.25

Calculadora de Viga— U 50x25x2

3D preview unavailable

Your device does not support WebGL. The 2D diagram below is still fully functional.

Vãomfixed @ 0mfixed @ 6m→kN/m

Resultados — U 50x25x2

Mmáx

15.0 kN·m

Vmáx

15.0 kN

δmáx

1180.07 mm

L/5

R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m

Norma:

Perca o medo de trabalhar em 3D

Sem instalacao, direto no navegador — comece agora

Experimente o Editor 3D