Steel Section Catalog
SHS 25x1.0
EN — Square Hollow Section
Square Hollow Sections (SHS) are tubular profiles with equal sides, ideal for columns and compression members due to their uniform buckling resistance in all directions.
The SHS 25x1.0 steel profile weighs 0.8 kg/m (0.51 lb/ft), has a depth of 25 mm (0.98 in), flange width 25 mm (0.98 in). Cross-sectional area: 96 mm². Moment of inertia Ix = 0.92 cm⁴, Iy = 0.92 cm⁴.
Cross-section (not to scale)
Gauge equivalent: 1 mm ≈ 18 gauge (Manufacturers Standard Gage)
Dimensions
| Property | Metric | Imperial |
|---|---|---|
| Depth (h) | 25 mm | 0.98 in |
| Width (b) | 25 mm | 0.98 in |
| Thickness (t) | 1 mm | 0.04 in |
| Fillet radius (r) | 1.5 mm | 0.06 in |
| Weight | 0.8 kg/m | 0.51 lb/ft |
Section Properties
| Property | Metric | Imperial |
|---|---|---|
| Area (A) | 96 mm² | 0.149 in² |
| Moment of inertia (Ix) | 0.92 cm⁴ | 0.02 in⁴ |
| Moment of inertia (Iy) | 0.92 cm⁴ | 0.02 in⁴ |
| Elastic section modulus (Sx) | 0.74 cm³ | 0.045 in³ |
| Elastic section modulus (Sy) | 0.74 cm³ | 0.045 in³ |
| Plastic section modulus (Zx) | 0.86 cm³ | 0.052 in³ |
| Plastic section modulus (Zy) | 0.86 cm³ | 0.052 in³ |
| Radius of gyration (rx) | 0.98 cm | 0.386 in |
| Radius of gyration (ry) | 0.98 cm | 0.386 in |
Beam Calculator— SHS 25x1.0
3D preview unavailable
Your device does not support WebGL. The 2D diagram below is still fully functional.
mfixed @ 0mfixed @ 6m→kN/m
Results — SHS 25x1.0
Mmax
15.0 kN·m
Vmax
15.0 kN
δmax
9171.20 mm
L/1
R115.0 kN| 15.0 kN·mR215.0 kN| -15.0 kN·m
Standard:
